Presto Lifts P3-AA Use and Care Manual download pdf (Page 12)

12 P3 ALL AROUND - PRESTO PALLET POSITIONER

OPERATING INSTRUCTIONS (continued)

Operating Safely -- Manual Use

1. Never push the load off of the side of the unit. If you

do this, the frame of the unit may jump upward.

2. Never use the unit when anyone is sitting or riding

on the turntable.

3. Do not try to use this unit with damaged or broken

pallets. Broken pallets may have boards or nails which

hang down below the main part of the pallet. As the

pallet is turned, these boards or nails may catch on the

frame. The pallet may stop turning suddenly and this

can cause the load to shift. You may be injured and

the unit may be damaged. If the boards or nails on the

bottom of the pallet extend down more than

inch,

they will interfere with the turning action.

4. Stay clear of the turntable when it is moving. As the

pallet turns, a part of the load may rotate around and

hit you.

5. Keep the area around the unit clean. Do not allow

any dirt, debris, spilled oil, or excess grease to collect.

These materials may cause you to slip while the unit is

operating and you may be injured.

Loading Manually

Add boxes or parts until the pallet is full. The unit will

gradually lower the pallet until it reaches the bottom.

See Figure 2.

Removing Loads Manually

Remove boxes or parts until the pallet is empty. The

unit will gradually raise the pallet. See Figure 3.

Figure 2. Loading Manually

WARNING!

Ensure that loading and unloading of the P3

is done in even layers. Loading or unloading

a load on one side may cause the load to tip

over and you may be injured. This can also

damage the unit.

Figure 3. Unloading Manually

Figure 4. Warning - Load in Layers

1 2 ... 7 8 9 10 11 12 13 14 15 16 17

No comments

Presto Lifts P3-AA Use and Care Manual Page 12